Rodeo (4WD) V6-3165cc 3.2L SOHC (6VD1) (1993)
/v6-3165cc_3.2l_sohc_(6vd1)/Page-330002.png)
CAUTION:
-
The pusher prevents air from entering the oil chamber. Its rod must always be facing upward.
INSTALLATION STEPS
To install, follow the removal steps in the reverse order.
13. Timing belt
CAUTIONS:
-
Do not bend or twist the belt, otherwise its core could be damaged. The belt should not be bent at a radius less than 3Omm.
-
Do not allow oil or other chemical substances to come in contact with the belt. They will shorten the belt life.
-
Do not attempt to pry or stretch the belt with a screwdriver or any other tool during installation.
-
Store timing belt in a cool and dark place. Never expose the belt to direct sunlight or heat.
1) Align groove of crankshaft timing pulley with mark on oil pump.
