Rodeo (4WD) V6-3165cc 3.2L SOHC (6VD1) (1993)
Heat Shield: All Technical Service Bulletins
Exhaust System - Rattling Noise
BULLETIN NUMBER
SB95-03-L001
ISSUE DATE
NOVEMBER 1995
GROUP
EMISSIONS
RODEO (UC) AND PICKUP (TF) 4ZE1 CATALYTIC CONVERTER RATTLING NOISE
AFFECTED VEHICLES
1993-95 Rodeo (UC) and 1994-95 Pickup (TF) models equipped with 4ZE1 engine.
SERVICE INFORMATION
On some affected vehicles, a rattling noise may be heard coming from the catalytic converter. This rattling results from cracking of the catalytic
converter heat shield due to metal fatigue.
To correct the problem, install a new heat shield (Part No. 8-97130-025-0) using the procedure described in this Service Bulletin. The new heat shield
has been reinforced to provide improved fatigue resistance.
REMOVAL
1.
Heat Shield
^
Remove four holding nuts.
^
Remove heat shield from bracket.
INSTALLATION
1.
Heat Shield
^
Install new heat shield (Figure 1) onto bracket.
^
Tighten four holding nuts to 18 NM (13 ft. lbs.)
PARTS INFORMATION
Part No.
Description
Quantity