isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Engine Oil Pressure Gauge/Lamp - Operation|Page 4270 > < Malfunction Indicator Lamp - A/T|Description and Operation|Page 4265
Page 1
background image

Oil Pressure Gauge: Technical Service Bulletins
Engine Oil Pressure Gauge/Lamp - Operation

BULLETIN NUMBER 
SB93-01-001

ISSUE DATE 
January 7, 1993

GROUP 
ENGINE

TROOPER (UX) AND RODEO (UC) ENGINE OIL PRESSURE

AFFECTED VEHICLES

1992-93 Trooper (UX) and 1993 Rodeo (UC) models equipped with 3.2L V6 engine.

SERVICE INFORMATION

Oil pressure gauge readings can vary greatly as oil temperature and engine speed change. A "low" gauge reading at hot idle does not necessarily indicate
a lubrication system problem.

This Service Bulletin describes oil pressure gauge and oil pressure warning light operation.

SERVICE PROCEDURE

Oil Pressure Gauge

Depending on oil temperature and engine RPM, the normal oil pressure gauge reading can range from 8.5 psi at hot idle to more than 100 psi during cold
acceleration (Figure 1).

If the engine oil pressure is below 8.5 psi, follow the appropriate Workshop Manual instructions for diagnosis and repair procedures for the lubrication
system and/or oil pressure gauge.

Engine Oil Pressure Gauge/Lamp - Operation|Page 4270 > < Malfunction Indicator Lamp - A/T|Description and Operation|Page 4265