Rodeo (4WD) V6-3165cc 3.2L SOHC (6VD1) (1993)
Electronic Ignition Assembly: Service and Repair
1.
Disconnect battery ground cable.
2.
Disconnect spark plug wires from Electronic Ignition (EI) assembly.
3.
Disconnect connectors on Engine Control Module (ECM), power supply, and Crankshaft Position Sensor (CKP).
4.
Remove three bolts securing EI unit and remove unit.
Spark Plug Wire Index
5.
Reverse steps to refit. Be sure to fit spark plug wires to correct terminals.
Tighten mounting bolts to lb-ft (Nm) 19 (25)