Rodeo (4WD) V6-3165cc 3.2L SOHC (6VD1) (1993)
SRS Coil Assembly: Service and Repair
Removal
1. Disarm SRS as outlined under Technician Safety Information.
2. On models with manual transmission, remove shift lever knob and transfer control knob.
3. Remove front console attaching screws.
4. Disconnect front console electrical connectors, then remove console.
5. Remove steering column lower cover, then hood release lever.
6. Place front wheels in straight-ahead position, then turn ignition to Lock position.
7. Remove air bag unit as outlined under Air Bag Unit, Replace.
8. Disconnect horn lead, then remove steering wheel to column shaft nut.
9. Place alignment marks on steering wheel hub and steering shaft.
10. Using puller J-29752, or equivalent, remove steering wheel from shaft. Feed wiring through steering wheel before removal.
11. Remove steering column cover.
Fig. 9 SRS Coil Assembly & Combination Switch Replacement
12. Disconnect coil assembly and combination switch electrical connectors, Fig. 9.
13. Remove coil assembly and combination switch attaching screws, then remove coil and complete assembly. Coil assembly is part of combination
switch. Do not attempt to remove coil from switch.