Rodeo (4WD) V6-3165cc 3.2L SOHC (6VD1) (1993)
/v6-3165cc_3.2l_sohc_(6vd1)/Page-1039001.png)
Steering Gear: Service and Repair
Manual Steering Gear
Removal and Installation
1.
Disconnect stabilizer bar, if necessary, then remove steering shaft nut.
2.
Disconnect pitman arm using a suitable puller, then scribe locating marks on coupling flange and worm shaft for reassembly.
3.
Remove coupling clamp bolt, gearbox mounting bolts, then the gearbox.
4.
Reverse procedure to install.
Disassembly and Assembly
DISASSEMBLY
