Rodeo (4WD) V6-3165cc 3.2L SOHC (6VD1) (1993)
/v6-3165cc_3.2l_sohc_(6vd1)/Page-1042001.png)
Steering Wheel: Service and Repair
Models Without Air Bag
1. Disconnect battery ground cable.
2. Remove horn shroud from center of steering wheel by removing attaching screw from behind steering wheel.
3. Remove steering wheel retaining nut.
4. Draw an alignment mark on steering column splines for installation reference.
5. Remove steering wheel using steering wheel puller tool No. J-29752, or equivalent.
6. Reverse procedure to install. Torque steering wheel retaining nut to 25-29 ft. lbs.
