Rodeo (4WD) V6-3165cc 3.2L SOHC (6VD1) (1993)
/v6-3165cc_3.2l_sohc_(6vd1)/Page-831004.png)
7. Clutch plates
^
Install clutch plates, start with steel plate and alternate with lined plates.
6. Backing plate
5. Snap ring
4. Turbine shaft
3. Sun gear
^
Overdrive sun gear, countersink pointing downwards.
2. Overdrive carrier assembly
^
Complete overdrive carrier assembly.
NOTE: Turn the assembly in a counter-clockwise direction only until roller clutch enters the outer race. After assembly, rotate the assembly and
listen for loose rollers.
1. Snap ring
