Rodeo (4WD) V6-3165cc 3.2L SOHC (6VD1) (1993)
/v6-3165cc_3.2l_sohc_(6vd1)/Page-863002.png)
^
Install new speedometer driven gear into speedometer driven gear bushing (Figure 1).
2.
Vehicle Speed Sensor/Speedometer Driven Gear Bushing
^
Install 0-ring an speedometer driven gear bushing into extension housing.
^
Install 6 mm retaining bolt onto extension housing. Torque bolt to 7 Nm (60 in. lbs).
^
Install wiring harness connector onto vehicle speed sensor.
PARTS INFORMATION
Part No.
Description
Quantity Required
8-97144-659-0
Driven Gear; Speedometer
1
FLAT RATE MANUAL UPDATE INFORMATION
Use the following published labor operation:
