Rodeo (4WD) V6-3165cc 3.2L SOHC (6VD1) (1993)
/v6-3165cc_3.2l_sohc_(6vd1)/Page-872002.png)
20. Spring pin
21. Plug
22. Band control screen assembly
23. Spring pin
24. Plug
25. 1-2 accumulator valve
26. 1-2 accumulator control valve
27. Check ball
^
Remove 1 check ball from valve body.
INSPECTION AND REPAIR
Inspect for the following and replace any damaged or worn parts:
^
Damage or wear to each valve.
^
Damage in oil passages.
^
Cracks or damage to valve body.
^
Valve operations.
^
Spring fatigue.
REASSEMBLY
27. Check ball
^
Install 1 check ball to valve body
26. 1-2 accumulator control valve
25. 1-2 accumulator valve
24. Plug
23. Spring pin
22. Band control screen assembly
21. Plug
20. Spring pin
19. Low pressure control valve
18. Spring
17. Plug
16. Spring pin
15. Spring
14. 2-3 shift valve
13. Retainer
12. 2-3 solenoid
11. Spring pin
10. Spring
9. 1-2/3-4 shift valve
8. Retainer
7. 1-2/3-4 solenoid
6. Spring pin
5. Waved washer
4. Pin
3. Band control solenoid
2. Manual valve
1. Gaskets and transfer plate
^
Install gasket (valve body/transfer plate) and transfer plate, using two guide pins (Fig. 7A - 66).
^
Install two 11 mm bolts.
Torque: N.m (lb.in) 13 (113)
