Rodeo 2WD V6-3.2L (2003)
2. Connect the SRS CONTROL UNIT harness connector and after that, put CPA into connector.
3. Install air conditioning duct for rear seat to normal position.
4. Return carpet normal position.
5. Install right side stay between instrument panel and floor, tighten to the specified torque.
Torque: 10 ± 3 N.m (1.0 ± 0.3 kg m / 87 ± 26 lb in)
6. Install the center console.
7. Install the transfer shift lever knob.
8. Install the dressing panel around the radio and reconnect cigar lighter harness.
9. Enable the Supplemental Restraint System (SRS). (Refer to Enabling the SRS).
