Rodeo 2WD V6-3.2L (2003)
![background image](/isuzu/rodeo_2wd/v6-3.2l/Page-104001.png)
Dimmer Switch: Service and Repair
Removal
1. Disconnect the battery ground cable.
2. Remove the instrument panel driver lower cover assembly (3).
-
Refer to Instrument Panel Assembly in Body Structure.
3. Remove the illumination controller (2).
-
Disconnect the controller connector.
-
Remove the controller knob (1).
-
Remove the nut.
-
Remove the controller from the back side of the instrument panel driver lower cover assembly.
Installation
To install, follow the removal steps in the reverse order.