Rodeo LS 2WD V6-3165cc 3.2L SOHC (6VD1) (1997)
Guide & Lock Bolts
3. Guide bolt.
4. Lock bolt.
5. Caliper assembly.
6. Support bracket with pad assembly.
^
Take care not to damage the flexible brake hose when removing the support bracket.
7. Pad assembly with shim.
^
Mark the lining locations if they are to be reinstalled.
8. Clip.
Install
Clip
1. Clip.
Inner Shims
2. Pad assembly with shim.
^
Apply special grease (included in (OEM) kit) (approx 0.2 g) to the both contacting surfaces of inner shims. Wipe off extruded grease after
installing.