Rodeo LS 2WD V6-3165cc 3.2L SOHC (6VD1) (1997)
Camshaft: Description and Operation
1.
Remove bearing retaining snap ring and tap bearing from retainer with a mallet.
2.
Remove rear seal using screwdriver or drift.
3.
Install new bearing using tool No. J-7818 or equivalent. Ensure shielded side of bearing faces toward inside of case.
4.
Install bearing retainer snap ring.
5.
Install new rear seal using installation tools No. J-8092 and J-29162 or equivalents.