Rodeo LS 2WD V6-3165cc 3.2L SOHC (6VD1) (1997)
1. Crankshaft and main bearings [15]
^
Install main bearings in the cylinder block and main bearing cap respectively.
^
Apply new engine oil to upper and lower main bearings.
NOTE:
^
Do not apply engine oil to the bearing back faces.
^
Make sure that main bearings are in correct position. Install crankshaft with care.
^
Apply engine oil to the thrust washer.
^
Install thrust washer on No.3 journal. Oil grooves in thrust washer must face the crankshaft.