Rodeo LS 2WD V6-3165cc 3.2L SOHC (6VD1) (1997)
Piston: Specifications
NOTE:
^
Carefully clean away all the carbon adhering to the piston head and the piston ring grooves.
^
Never use a wire brush to clean the pistons. Damage will result.
^
Visually check each piston for cracking, scoring, and other signs of excessive wear.
^
If any of the above conditions are present, the piston must be replaced.
1. Measure the piston outside diameter with micrometer at the piston grading position and a right angle to the piston pin.
^
Piston grading position (from piston head): 31.0 mm (1.22 inch).
^
The size mark for piston outside diameter is represented by the "G" as shown in the illustration. Measure the cylinder bore inside diameter.