Rodeo LS 2WD V6-3165cc 3.2L SOHC (6VD1) (1997)
Valve Guide: Service and Repair
Replacement
1. Using special tool, drive out the valve guide from the combustion chamber side.
^
Using the valve guide replacer: J-37985 or equivalent.
2. Apply engine oil to the outside of the valve guide.
^
Using special tool, drive in a new valve guide from the camshaft side, and check the valve guide height.
^
Valve guide replacer: J-37985
^
Valve guide replacer adapter: J-39204
^
Or equivalents
3. Check the clearance. If the clearance is less than the specified value, ream the inside diameter of valve guide.
^
Using a sharp 6 mm reamer, ream the valve guide to obtain the specified clearance.