Rodeo LS 2WD V6-3165cc 3.2L SOHC (6VD1) (1997)
^
Or equivalents
2. Oil controller and spring lower seat. Using special tool, drive in a new oil controller. [8]
^
Use the oil controller replacer: J-38537
3. Valve [7]
^
Apply engine oil to the outside of the valve stem.
4. Valve spring [6]
^
Attach the valve seat to the upper spring seat. The painted area of the valve spring should be facing downward.
5. Split collar and upper spring seat. [5]
^
Use a spring compressor to push the valve spring into position.
^
Install the spring seat split collar.
^
Set the split collar by tapping lightly around the head of the collar with a rubber hammer.
^
Use the valve spring compressor: J-39251, or equivalent.
6. Rocker shaft assembly (Intake side) [4]
7. Rocker shaft assembly (Exhaust side) [3]
8. Camshaft assembly [2]
9. Camshaft bracket fixing bolts [1]