Rodeo LS 2WD V6-3165cc 3.2L SOHC (6VD1) (1997)
/Page-1543002.png)
4. Snap ring
-
Using snap ring pliers to remove the snap ring.
5. Pulley assembly
-
Using pulley puller pilot (J-38424), pulley puller (J-8433) and pulley puller leg (J24092) to remove the pulley assembly.
6. Lead wire connector
-
Loosen screw and disconnect the coil lead wire connector.
7. Field coil
-
Loosen three screws and remove the field coil.
