Rodeo LS 2WD V6-3165cc 3.2L SOHC (6VD1) (1997)
3. Remove the torsion bar making sure to apply the setting marks to the torsion bar and lower control arm.
4. After removing the bar, inspect the following parts: torsion bar, the height control arm, the adjust bolt and the rubber seat.
INSTALLATION
1. Install the torsion bar. Make sure the bars are on their correct respective sides.
2. Apply grease to the serrated portions and align the setting marks.
3. Install the height control arm and perform the following:
-
Apply grease to the portion that fits into the bracket.
-
Align the setting marks.