Rodeo LS 2WD V6-3165cc 3.2L SOHC (6VD1) (1997)
/Page-1020007.png)
DISASSEMBLE
1. Retaining ring. Install the tool on spring seat. Compress the spring seat.
-
Compressor: J-23327.
NOTE: Do not over-stress the springs and seat, as this will cause damage to the spring seat.
2. Spring seat
3. Springs
4. Piston
5. Center support. Remove 8 bolts from center support. Remove center support from adapter case.
6. Gasket
7. Transfer plate
8. Gasket
9. Restrictor
10. Retainer plate
11. Plug
12. Spring
13. Overrun lock out valve
INSPECTION AND REPAIR
Visual check. If any damage, deformation or local wear is found in a retaining ring, return spring, spring retainer, piston or center support, replace
it.
