Rodeo LS 2WD V6-3165cc 3.2L SOHC (6VD1) (1997)
![background image](/isuzu/rodeo_ls_2wd/v6-3165cc_3.2l_sohc_(6vd1)/Page-1160001.png)
Control Module: Service and Repair
REMOVAL
PREPARATION: Disconnect negative (-) battery cable.
1. Front console
2. Wiring harness connector. Disconnect PCM wiring harness connectors from PCM.
3. PCM:
a. Remove two PCM retaining screws.
b. Remove two brackets from PCM.
INSTALLATION
NOTE: To install, follow the removal steps in the reverse order.
1. PCM:
a. Install two brackets to PCM.
b. Install two PCM retaining screws.
2. Wiring harness connector. Connect PCM wiring harness connectors to PCM.
3. Front console. Connect negative (-) battery cable.