Rodeo LS 4WD V6-3.2L (1998)
Auxiliary Step / Running Board: All Technical Service Bulletins
Accessory Side Step - Anti Skid Strip Replacement
BULLETIN NUMBER:
SB97-13-L004
ISSUE DATE:
DECEMBER 1997
GROUP:
ACCESSORIES
1998 RODEO (UE) ACCESSORY SIDE STEP ANTI-SKID STRIP REPLACEMENT
AFFECTED VEHICLES
All 1998 Rodeo (UE) 4WD models equipped with accessory side steps.
SERVICE INFORMATION
Some affected vehicles may experience edge peeling of the left and/or right anti-skid strip applied to the top of the accessory side step. This
adhesive-backed strip ensures each accessory side step provides a convenient, non-skid surface when used for entering and exiting the vehicle, or for
accessing the roof. The cause of this edge peeling may be due to inadequate bonding of the adhesive material to the accessory side step's painted surface.
To repair this condition, replace the accessory side step anti-skid strips (both left and right sides), with new, improved accessory side step anti-skid strips
(Part No. 2-90313-816-0) currently available from the American Isuzu Parts Distribution Network (AIPDN). Follow the installation instructions
packaged with the parts. For convenient reference, a copy of the installation instructions is included with this Service Bulletin.
IMPORTANT!
The adhesive material used in the new accessory side step anti-skid strips requires 72 hours to fully the cure time of installation. Be sure to advise
your customer at vehicle pickup to avoid using the side step during this 72 hour curing period.
PARTS INFORMATION
Part No.
Description
Quantity
2-90313-816-0
Side Step Adhesive
2
(accessory side step
anti-skid strip)
WARRANTY CLAIM INFORMATION
Use published Flat Rate Manual labor operation number 130824 for accessory side step anti-skid strip replacement.
INSTALLATION INSTRUCTIONS
Part Description:
SIDE STEP ADHESIVE STRIP
Part Number:
2-90313-816-0
Model Description:
RODEO 1998
BILL OF MATERIALS
TOOLS REQUIRED:
