Rodeo LS 4WD V6-3.2L (1998)
5. Remove EHCU ASM.
6. Remove EHCU.
DISASSEMBLY
1. Remove fixing bolts from EHCU.
2. Remove coil integrated module from hydraulic unit.
REASSEMBLY
To reassembly, follow the disassembly steps in the reverse order, noting the following points:
Torque:
Fixing bolts: 4.4 Nm (39 inch lbs.)
INSTALLATION
To install, follow the removal steps in the reverse order, noting the following points:
Torque:
Hydraulic unit fixing nuts: 22 Nm (16 ft. lbs.)
Ground cable: 14 Nm (10 ft. lbs.)
Brake pipe (joint bolts): 16 Nm (12 ft. lbs.)
-
After installing the hydraulic unit, bleed brakes completely.