Rodeo LS 4WD V6-3.2L (1998)
17.
Loop the slack portion of the harness and bundle it with the existing fixed harness at the forward location. Tuck and secure together using a band
strap. (Figure 17)
18.
Bundle the unsecured harness with fixed harness (attachment clipped on side of frame near the frame-side bushing of upper-link), and secure
together using a band strap. (Figure 18)
19.
Cut the exposed pulled tab of the (3) previously installed band straps. Do not cut any harnesses.
20.
Reinstall left-rear wheel and lower the vehicle.
21.
Reconnect the battery (-), and reset the clock and radio presets.
PARTS INFORMATION
WARRANTY CLAIM INFORMATION