Rodeo LS 4WD V6-3.2L (1998)
5. Previously remove the rear cable from the parking brake lever, then remove the brake shoe assembly (7).
6. Remove cable fixing bolt (8) and bolt (9) (10) (11).
7. Remove nut (12).
8. Remove nut (13) and retainer (14).
9. Remove rear cable (15).
INSTALLATION
1. Apply grease (BESCO L-2 or equivalent) to the connecting portion of the rear cable and equalizer. Install rear cable (15).
2. Install retainer (14).
-
Tighten nut (13) to the specified torque.
Torque: 41 Nm (30 ft. lbs.)
3. Tighten nut (12) to the specified torque.
Torque 15 Nm (11 ft. lbs.)
4. Tighten bolt (11) (10) (9) to the specified torque.
Torque: 6.5 Nm (57 inch lbs.)
5. Tighten the cable fixing bolt (8) to the specified
Applying Grease To Backing Plate Assembly
6. Install shoe assembly (7).
After installation of the shoe and cable assembly, apply special grease (included in the repair kit) to the following portions indicated in the figure.
