Rodeo LS 4WD V6-3.2L (1998)
Coolant: Technical Service Bulletins
Engine - Service Procedures Revision
BULLETIN NUMBER:
SB97-01-L008
ISSUE DATE:
DECEMBER 1997
GROUP:
ENGINE
1998 RODEO (UE) 3.2L V6 ENGINE SERVICING PROCEDURES
(WORKSHOP MANUAL REVISION)
AFFECTED VEHICLES
1998 Rodeo (UE) models equipped with 3.2L V6 engine.
SERVICE INFORMATION
Text and artwork contained in the following Workshop Manual have been revised:
Manual
Page No.
1998 Rodeo (UE) Workshop
6A-19, 20, 21, 24, 25, 94
Manual (Publication No.
6B-4, 6
UE098-WSM-L01)
6G-8
Below is a summary of the revisions to the 1998 Rodeo Workshop Manual text and artwork included in this Service Bulletin:
^
Pages 6A-19 and 20 - writeup expanded to include additional details for R&R of left-hand cylinder head cover.
^
Page 6A-21 - writeup expanded to include additional details for R&R of right-hand cylinder head cover.
^
Page 6A-24 - torque spec for left-hand exhaust manifold fixing nuts changed from 57 Nm (42 lb ft.) to 52 Nm (38 lb. ft.).
^
Page 6A-25 - torque spec for right-hand exhaust manifold fixing nuts changed from 57 Nm (42 lb. ft.) to 52 Nm (38 lb. ft.).
^
Page 6A-94 - figure for special tools J-8062 and J-42898 revised.
^
Page 6B-4 - note added to antifreeze solution mixing ratio paragraph.
^
Page 6B-6 - note added to water pump installation procedure.
^
Page 6G-8 - torque spec for oil pan fixing bolts changed from 10 Nm (89 lb. in.) to 25 Nm (18 lb. ft.).
