Rodeo LS 4WD V6-3.2L (1998)
Place the camshaft on V-blocks. Slowly rotate the camshaft and measure the runout with a dial indicator. Replace the camshaft if the runout exceeds the
specified limit.
Run out
Limit ............................................................................................................................................................................................... 0.1 mm (0.0039 inch)
Measure the camshaft journal oil clearance.
Measure the camshaft bracket housing inside diameter.
NOTE: Tighten camshaft bracket (2) to 10 Nm (89 inch lbs) before measuring the camshaft bracket inside diameter.
Subtract the camshaft outside diameter from the camshaft bracket housing inside diameter.
Oil Clearance
Standard ............................................................................................................................................ 0.027 mm - 0.078 mm (0.0011 inch - 0.0031 inch)
Limit ............................................................................................................................................................................................. 0.11 mm (0.0043 inch)
