Rodeo LS 4WD V6-3.2L (1998)
Crankshaft: Specifications
Oil Clearance
Torque Specifications when using plastigage to measure oil clearance:
Main bearing cap bolts ........................................................................................................................................................................ 39 Nm (29 ft. lbs.)
Oil gallery fixing bolts
1st step .......................................................................................................................................................................................... 29 Nm (21 ft. lbs.)
2nd step ......................................................................................................................................................................................................... 55° - 65°
Crank case side bolts ........................................................................................................................................................................... 39 Nm (29 ft. lbs.)
Next
Measure the plastigage width and determine the oil clearance. If the oil clearance exceeds the specified limit, replace the main bearings as a set and/or
replace the crankshaft.
Oil Clearance
Standard ........................................................................................................................................... 0.019 mm - 0.043 mm (0.0007 inch - 0.0017 inch)
Limit ............................................................................................................................................................................................ 0.08 mm (0.0031 inch)
