Rodeo LS 4WD V6-3.2L (1998)
4. Move serpentine belt tensioner to loose side using wrench then remove drive belt.
5. Remove cooling fan assembly four fixing nuts, then the cooling fan assembly.
6. Remove crankshaft pulley assembly using J-8614-01 crankshaft holder, hold crankshaft pulley then remove center bolt and pulley.
INSTALLATION
1. Install crankshaft pulley using J-8614-01 crankshaft holder, hold the crankshaft pulley and tighten center bolt to the specified torque.
Torque: 167 Nm (123 ft. lbs.)
2. Install cooling fan assembly and tighten nuts to the specified torque.
Torque: 22 Nm (16 ft. lbs.)
3. Move serpentine belt tensioner to loose side using wrench, then install serpentine belt to normal position.
4. Install radiator upper fan shroud.
5. Install air cleaner assembly.
