Rodeo LS 4WD V6-3.2L (1998)
Valve Spring: Testing and Inspection
INSPECTION AND REPAIR
Valve Spring
CAUTION: Visually inspect the valve springs and replace them if damage or abnormal wear is evident.
1. Measure the free height of the springs. The springs must be replaced if the free height is below the specified limit.
Standard: 44.6 mm (1.756 inch)
Limit: 43.6 mm (1.717 inch)
2. Measure the valve spring squareness with a steel square and replace the valve springs if the measured value exceeds the specified limit.
Limit: 2 mm (0.079 inch)