Isuzu Workshop Service and Repair Manuals > Rodeo LS 4WD V6-3.2L (1998) > Engine, Cooling and Exhaust | Engine | Timing Components | Timing Belt | Component Information | Service and Repair

Timing Belt Removal and Engine Timing|Page 1853 > < Maintenance - Timing Belt/Valve Clearance|Page 1850

Page 1

Timing Belt: Service and Repair
Timing Belt Removal and Engine Timing

THIS ARTICLE HAS BEEN UPDATED

TIMING BELT REMOVAL

NOTE:

Left and right engine callouts are from the driver's seat.

1. Disconnect battery ground cable.
2. Remove air cleaner assembly.
3. Remove radiator upper fan shroud from radiator.

4. Move drive belt tensioner, to loose side, using wrench then remove drive belt.
5. Remove cooling fan assembly four nuts, then the cooling fan assembly.
6. Remove cooling fan drive pulley assembly.
7. Remove idle pulley assembly.
8. Remove serpentine belt tensioner assembly.
9. Remove power steering pump assembly.

Engine, Cooling and Exhaust
Engine
Timing Components
Timing Belt / Component Information
Service and Repair
Timing Belt Removal and Engine Timing

Timing Belt Removal and Engine Timing|Page 1853 > < Maintenance - Timing Belt/Valve Clearance|Page 1850

Isuzu Workshop Service and Repair Manuals

Rodeo LS 4WD V6-3.2L (1998)

Engine, Cooling and Exhaust Engine Timing Components Timing Belt / Component Information Service and Repair Timing Belt Removal and Engine Timing

Engine, Cooling and Exhaust Engine Timing Components Timing Belt / Component Information Service and Repair Timing Belt Removal and Engine Timing

Engine, Cooling and Exhaust
Engine
Timing Components
Timing Belt / Component Information
Service and Repair
Timing Belt Removal and Engine Timing

Engine, Cooling and Exhaust
Engine
Timing Components
Timing Belt / Component Information
Service and Repair
Timing Belt Removal and Engine Timing