Rodeo LS 4WD V6-3.2L (1998)
13. Insert the correct shim, number side down, into the tappet. Make sure the shim is fully seated.
14. Install the camshafts (see steps 2 thru 9 of CAMSHAFT SUBGEAR PRELOADING, GEAR TIMING, AND CAMSHAFT INSTALLATION).
15. Rotate the camshaft pulleys a few turns to ensure the new shims are fully seated.
16. Recheck the clearances of the valves you adjusted with the Go/No-Go method (see step 3). If any clearances are incorrect, readjust them.
Valve Shims (While 41 shims are available, the 10 sizes will cover most valve adjustments):
