Rodeo LS 4WD V6-3.2L (1998)
Exhaust Pipe: Service and Repair
Rear Exhaust Pipe
REMOVAL
1. Disconnect battery ground cable.
2. Lift up the vehicle and support with suitable safety stands.
3. Remove the rear exhaust fixing nuts (2) and the mounting rubbers (1) (3), then remove the rear exhaust pipe (4).
INSTALLATION
1. Install the rear exhaust pipe (4) and the mounting rubbers (1) (3), then tighten the fixing nuts (2) to the specified torque.
Torque
Nuts: 43 Nm (32 ft. lbs.)
