Rodeo LS 4WD V6-3.2L (1998)
To install, follow the removal steps in the reverse order, noting the following points:
1. To install a new evaporator assembly, add 50 cc (1.7 fl.oz.) of new compressor oil to the new core.
2. Tighten the refrigerant outlet line to the specified torque.
Torque: 25 N.m (18 lb.ft)
3. Tighten the refrigerant inlet line to the specified torque.
Torque: 15 N.m (11 lb.ft)
4. O-rings cannot be reused. Always replace with new ones.
5. Be sure to apply new compressor oil to the O-rings when connecting lines.