Rodeo LS 4WD V6-3.2L (1998)
Fuse: Diagram Information and Instructions
Circuit Identification for In-Line and Fuse Box Connectors
To see the configuration of a connector's cavities, look up its number in Diagrams / Connector Views. Each view includes the color of the connector,
where it is located and what it connects to.
Use the Connector Views to help locate the proper cavity when you need to probe a connector. It can be especially helpful if the connector has more than
one wire of the same color.
You can also use Connector Views to help diagnose multiple symptoms in separate circuits which could be caused by a single problem in a connector
shared by those circuits. Here's how:
1. Pick one of the multiple symptoms and look up the schematic for that circuit.
2. Make a list of all the in-line and fuse box connectors in that schematic.
3. Then, in Connector Views, look up each connector on your list to see if circuits related to the other symptoms run through one of them. If they do,
inspect that connector for the problem.
Example: The blower, rear window defogger and the windshield wiper don't work. List all in-line and fuse box connectors in the blower controls circuit
and then check the Connector Views. You find that C324 is common to the rear window defogger circuit and wiper/washer circuit, so you inspect C324
and find the problem, bent terminals.
