Rodeo LS 4WD V6-3.2L (1998)
NOTE:
After you rotate the crankshaft, the solid white lines on the belt will not align with the camshaft pulley marks; this is normal.
10. Remove the crankshaft bolt, then install the lower, the right, and the left timing belt covers. Torque the cover bolts to 19 N.m (14 lb-ft).
11. Install the crankshaft pulley, and torque the bolt to 167 N.m (123 lb-ft).
12. Install fan pulley bracket and tighten fixing bolts to the specified torque.
Torque: 22 Nm (16 ft. lbs.)
13. Install power steering pump assembly and tighten to the specified torque.
Torque:
M8 bolt: 22 Nm (16 ft. lbs.)
M10 bolt: 46 Nm (34 ft. lbs.)
14. Install cooling fan assembly and tighten bolts/nuts to the specified torque.
Torque: 22 Nm (16 ft. lbs.) for fan pulley and fan bracket.
Torque: 7.5 Nm (66.4 inch lbs.) for fan and clutch assembly.
