Rodeo LS 4WD V6-3.2L (1998)
^
(P-10) Ground terminal, on the alternator support bracket (Figure 1)
^
(P-7) Ground terminal, near the alternator, on the frame (Figure 2)
^
Push the release tab of the band clip near the alternator and remove from harness for later use. Do not cut or discard this original band clip.
^
(P-8) Harness connector at the side of alternator (Figure 3)
^
(P-9) B+ ring terminal with two (WHT) wires at the rear of alternator (Figure 3)
