Rodeo LS 4WD V6-3.2L (1998)
Air Bag Warning Lamp: Testing and Inspection
Warning Lamp Comes "ON" Steady
Chart B: "Air Bag" Warning Lamp Comes "ON" Steady
Air Bag Warning Lamp Comes "ON" Steady
Circuit Description
When the ignition switch is first turned "ON", "ignition 1" voltage is applied from the "MA01" meter fuse to "AIR BAG", warning lamp which is
connected to "SRS warning lamp", terminal "7". The "SRS-1" fuses apply system voltage to the "ignition 1" inputs, terminals "12". The SDM responds
by flashing the "AIR BAG" warning lamp 7 times. If "ignition 1" voltage is less than 9 Volts, the "AIR BAG" warning lamp will come "ON" solid with
no DTCs set.