Rodeo LS 4WD V6-3.2L (1998)
most connector numbers and component names are PHOTO and VIEW numbers. The PHOTO number refers to a photo in the image that shows
the connector's location on the car. The VIEW number refers to an illustration in the image that shows the connector face, wire colors, connector
cavity numbers and other details. The connector cavity numbering sequence begins at the top left corner of the connector as seen from either of the
viewpoints. Disregard any numbers molded into the connector housing.
Wires
Wires are identified by the abbreviated names of their colors; the second color is the color of the stripe. Wires are also identified by their location
in a connector. The number "2" next to the male and female wire terminals at C416, for example, means those terminals join in cavity 2 of
connector C416.
Symbols
A complete description of schematic symbols is given under wire color abbreviation.
Component Locations
To see where a component or connector is located on the car, look up its photo number in Locations / Components / Photographs. The photo will also
tell you the color of the connector, and how many cavities it has.
Ground Distribution Schematics
