Rodeo LS 4WD V6-3.2L (1998)
5.
Remove the rear plastic door sill plate with kick panel, and lift the carpet to remove the No.3 body mount bolt access plug. Repeat this step for the
other side. (Figure 4)
Figure 5: Remove the No.2 body mount bolt.
6.
Loosen and remove the No.2 body mount bolt through access hole along with washer/ nut underneath the mount. (Figure 5)
Figure 6: Remove the No.3 body mount bolt.
7.
Loosen and remove the No.3 body mount bolt through access hole along with washer/nut underneath the mount. (Figure 6)