Rodeo LS 4WD V6-3.2L (1998)
b. Parking brake cable driver side (2 points).
i.
New Bolt (2) P/N 0-28050-612-0 Torque: 6.5 to 8.5Nm (57 to 75 lbf in.)
c. Wiring harness from frame driver side (6 points).
i.
3 points on included on new bracket
ii. 3 points new frame clips P/N 9-97209-720-0
d. Brake piping passenger side clips (4 clips).
i.
3 clips frame rail
1. V6 P/N 8-97125-111-1
2. 4cyl P/N 8-97236-077-0
ii. 1 clip for new bracket position P/N 9-98153-939-1
e. ABS harness and piping right front fender well.
f.
Canister pipe (3 points).
43. Re-Install the fuel tank assembly per service manual:
i.
Install fuel supply line at fuel filter using new clamp (P/N 8-97148-892-1).
ii. Install fuel return line at fuel filter using new clamp (P/N 8-94238-572-0).
iii. Install fuel tank. Install new parts at locations 2, 3, 4, and 6 shown in Figure 54.
44. Install the following components per the service manual.
a. Rear Bumper Assembly (UE only)
b. Rear Bumper Fascia and Fascia support bracket (UP only)
i.
2 nuts front flange
ii. 2 nuts rear flange
iii. 4 nuts rubber mount