isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

ABOUT US
A/t - Select Lever/Cable Adjustment Revisions|Page 4035 > < A/t - Select Lever/Cable Adjustment Revisions|Page 4033

Rodeo LS 4WD V6-3.2L (1998)

Page 1
background image

Shift Cable: Service and Repair

SELECT CABLE 

Removal
1. Set selector lever in "P" position.
2. Remove transfer control lever knob, lower cluster assembly, rear console, center console, selector lever knob and cover.

3. Disconnect inner cable by pulling projection on pin.

4. Press down claws and disconnect cable assembly.
5. Disconnect PCM harness connectors and remove nuts that fasten grommet in select cable assembly.

6. Disconnect inner cable.

7. Press down claws and disconnect cable assembly.

A/t - Select Lever/Cable Adjustment Revisions|Page 4035 > < A/t - Select Lever/Cable Adjustment Revisions|Page 4033