Rodeo LS 4WD V6-3.2L (1998)
Clutch Master Cylinder: Service and Repair
Unit Overhaul
DISASSEMBLED VIEW
DISASSEMBLY
1. Disassemble reservoir cap (1), base cap (2), seal (3), clip (4), and reservoir (5).
2. Disassembly gasket (6), yoke (7), and nut (8).
3. Disassemble rod stopper (9), push rod (10), and piston assembly (11).
4. Disassemble plate (12), O-ring (13), damper ring (14), diaphragm (15), and seal ring (16) from cylinder body (17).
INSPECTION AND REPAIR
Make the necessary adjustments, repair, and part replacements if excessive wear or damage is discovered during inspection.
Cylinder Body
1. Clean the cylinder body.
2. Check the fluid return port for restrictions and clean it if necessary.
Inner Parts