Rodeo LS 4WD V6-3.2L (1998)
4. Remove shaft assembly from the axle housing.
5. Remove snap ring and bearing cup.
6. Break retainer ring with hammer and chisel.
7. Break bearing cage with hammer and chisel.
8. Remove oil seal, retainer, and emergency brake assembly.
9. Remove inner race from shaft with OTC-1126 bearing splitter and press.
INSPECTION
-
Shaft for spalling or grooves from seal wear.
-
Retainer - bent or damaged.
-
Replace items if required.
INSTALLATION
1. Emergency brake assembly.
