Rodeo LSE 4WD V6-3.2L (2000)
6.
Before installing the new bushing, apply molybdenum grease, or equivalent liberally to the door check arm, top and bottom of bushing, and
bushing pinhole (figure 3).
IMPORTANT:
Grease application is critical for proper operation.
NOTE:
Review the matrix shown to determine appropriate procedure.
7.
Carefully, tap and install the pin with the slot facing towards the door assembly (Figure 4).
IMPORTANT:
To avoid future door popping sound, make certain to face the pin slot towards the door when reinstalling.
NOTE:
Check pin for fit, if pin does not fit tightly into place it will need to be replaced, otherwise the door popping sound will continue.
^
Replacing the Door Check Arm Assembly (P/N 8-97325-331-0)