Rodeo LSE 4WD V6-3.2L (2000)
Grease Amount
-
Hub: 35 g (1.23 oz.)
-
Outer bearing: 10 g (0.35 oz.)
-
Inner bearing: 15 g (0.53 oz.)
8. Install hub nut. Turn to the place where there is a chamfer in the tapped hole to the outer side, then attach the nut by using front hub nut wrench
J-36827.
PRELOAD ADJUSTMENT
1. Tighten the hub nut to 29 Nm (22 ft. lbs.), then fully loosen the nut.