Rodeo LSE 4WD V6-3.2L (2000)
Fuel Gauge: Service and Repair
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Loosen the fuel filler cap.
3. Drain the fuel from the tank.
Tighten
Tighten the drain plug to 20 N.m (14 lb ft.).
4. Disconnect the wiring connector from the fuel gauge unit.
5. Remove the fuel gauge unit retaining screws.
6. Remove the fuel gauge unit.
7. Cover or plug the fuel tank to prevent dust, dirt, or debris from entering the tank.
INSTALLATION PROCEDURE
1. Install the fuel gauge unit.