Rodeo LSE 4WD V6-3.2L (2000)
Seat Belt: Service and Repair
Front Seat Belt (LWB)
Front Seat Belt And Associated Parts
Removal
1. Disconnect the battery ground cable.
2. Remove the sill plate (Front & Rear).
3. Remove the cap and seat belt lower anchor bolt.
4. Remove the center pillar lower trim cover.
5. Remove the door seal finisher (Front & Rear).
6. Remove the center pillar upper trim cover.
7. Remove the seat belt upper anchor bolt.
8. Remove the retractor fixing bolt.
9. Remove the seat belt assembly.
Remove the two fixing bolts.
Installation
