Rodeo S 2WD L4-2.2L (1999)
Drink Holders: All Technical Service Bulletins
Interior - Rear Cup Holder Swing Arm Loose
TSB SB02-11-S004
1999-2002 Rodeo (UE) Rear Beverage Holder Swing Arm Loose
ISSUE DATE: SEPTEMBER, 2002
Affected Vehicles
1999-2002 Rodeo (UE) equipped with rear beverage holder.
Service Information
Condition:
On affected vehicles, owners may complain that the rear beverage holder swing arm will not stay in an open or closed position because the detents do not
hold.
Possible Cause:
One or both of the metal detent clips are out of place or missing.
Correction:
Check for proper installation of both detent clips, if missing, replace detent clip (Part Number: 8-97212-275-0).
Service Procedure
1.
With parking brake applied remove the rear console assembly.